Unitec POS4000/V2-Wash Select II - Manual (Page 91)

P O S 4 0 0 0
Document Number: POS4007 65
Document Title: POS4000/V2 WSII Operations Manual
• Clear ALL Used
• Clear Old Codes
To execute one of the secondary commands, scroll through the secondary menu until the
command of interest is displayed, and then press the [ENTER] key.
Note: This command does not give access to the fleet account information.
4.11.1 Print Valid Codes
This command can be used to print all valid codes. To execute this command, scroll through the
MEMORY secondary menu until "Print Valid Codes" appears. Then press [ENTER].
When this command is executed, the console will display the total number of valid codes in
memory and then prompt for the number of codes that you want printed. Type the number of
codes you want followed by the [ENTER] key. The console will print that many of the most
recently issued valid codes.
Example to print 50 most recent valid codes:
[CMD]
[MEMORY]
[1]
(password 1)
[ENTER]
[MENU UP/DOWN] until "Print Valid Codes" appears
[ENTER]
[5][0]
(number of codes you want printed)
[ENTER]
4.11.2 Print Used Codes
This command is the same as the "Print Valid Codes" command except that it prints the most
recently used codes.
4.11.3 Clear ALL Valid Codes
This command cancels all valid customer codes currently in memory. To execute this command,
scroll through the MEMORY secondary menu until "Clear ALL Valid" appears. Then press
[ENTER].
In addition to the password security, this function requires you to confirm the operation by
entering 99. This provides extra security to avoid accidental deletion of the codes. This command
does not delete fleet account codes.
Example to delete all valid codes from memory:
[CMD]
[MEMORY]
[1]
(password 1)
[ENTER]
[MENU UP/DOWN] until "Clear All Valid" is displayed
[ENTER]
[9][9]
(enter 99 to proceed)