Unitec POS4000/V2-Wash Select II - Manual (Page 62)

P O S 4 0 0 0
Document Number: POS4007 36
Document Title: POS4000/V2 WSII Operations Manual
4.1.11 Multiple Unit MENU->
Note:
This command is used to configure an OPTIONAL FEATURE of the POS4000. If this
feature is not present in your system, you will not be able to execute these commands.
This sub-menu is used to configure the multiple customer interfaces (carwash) and multiple Point-
of-Sale (POS) capabilities of your system. It contains 4 sub-menu items:
• Set Unit Number
• Controller/Remote
• Set # Bays/Consoles
• Prog Remote Consoles
To execute one of the sub-menu commands, first select "Multiple Unit MENU->" from the
SYSTEM SETUP menu, and then scroll through the sub-menu until the command of interest is
displayed and then press the [ENTER] key.
4 . 1 . 1 1 . 1 S e t U n i t N u m b e r
This command is used to set the unit number of the POS4000.
To select this command, scroll through the Multiple Unit sub-menu until "Set Unit Number"
appears and then press [ENTER].
Example to set the unit number of a POS4000 as 3:
[CMD]
[SYSTEM SETUP]
[3]
(password 3)
[MENU UP/DOWN] until "Multiple Unit MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Set Unit Number" appears
[ENTER]
[3]
[ENTER]
Note: The default unit number is 1.
4 . 1 . 1 1 . 2 C o n t r o l l e r / R e m o t e
This command is used to designate a POS4000 main console as either a controller console or a
remote console.
To select this command, scroll through the Multiple Unit sub-menu until "Controller/Remote"
appears and then press [ENTER].
Example to designate a main console as a REMOTE Console:
[CMD]
[SYSTEM SETUP]