Unitec POS4000/V2-Wash Select II - Manual (Page 57)

P O S 4 0 0 0
Document Number: POS4007 31
Document Title: POS4000/V2 WSII Operations Manual
4 . 1 . 9 . 4 S e t D i s p e n s e M o d e ( E - S y s t e m 4 0 0 0 o n l y )
This command is used to set criteria for when the E-System 4000 coin box will dispense change.
This function will not affect the change making ability for a Hamilton Autotec. The dispense
modes are defined as follows:
Table 13. E-System Dispense Mode
Dispense Mode Description Comments
0 No change available None
1 Change available after
wash activated
Change is available at the
escrowed amount only. If the
amount entered is equal to the
value of a wash (the wash armed)
then the amount will not be
refunded. Only the amount between
the wash prices is refunded.
Example: If wash prices are $3.00,
$4.00, and $5.00, and the customer
enters $3.50 ($3.00 wash is armed)
then selects the refund button, then
only the $.50 is refunded.
Refunding is disabled until the
customer has armed a wash.
2 Change available before
wash activated.
This is the same as with mode 1
except that the refund is available
before a wash is activated also.
Note: if the system is prompting the
customer to make a wash selection,
refunding will not be available.
4.1.10 External POS MENU->
Note:
This command is used to configure an OPTIONAL FEATURE of the POS4000. If this
feature is not present in your system, you will not be able to execute these commands.
This sub-menu is used to configure the external Point-of-Sale (POS) capabilities of your system.
It contains the following sub-menu items:
• Set POS Offset (direction and amount)
• Set EXT. POS Type
• Set POS MAX WASHES (for special circumstances only)
• Set Send Code age (for certain EXTPOS units only)
• Set Reverse order (to allow pumps to have wash 1 most expensive)
• Set Default Discounts