3 set number of bays and consoles, 4 program remote consoles – Unitec POS4000/V2-Wash Select II User Manual

Page 63

P O S 4 0 0 0

Document Number:

POS4007

Document Title:

POS4000/V2 WSII Operations Manual

[3]

(password

[MENU UP/DOWN] until "Multiple Unit MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Controller/Remote" appears
[ENTER]
[2]

to select Remote

[ENTER]

Note:

The default is for the console unit to be a controller.

4 . 1 . 1 1 . 3 S e t N u m b e r o f B a y s a n d C o n s o l e s

This command is used to define the number of customer interfaces (carwash bays) and remote
POS4000s that are present at a site.

Note:

Do not include the controller POS4000 when counting the number of Remote
POS4000s.

To select this command, scroll through the Multiple Unit sub-menu until "Set # Bays/Consoles"
appears and then press [ENTER].

Example to setup a controller console to communicate with 2 customer interfaces and 1 remote
POS4000:

[CMD]
[SYSTEM SETUP]
[3]

(password

[MENU UP/DOWN] until "Multiple Unit MENU->" appears
[ENTER]
[MENU UP/DOWN] until "Set # Bays/Consoles" appears
[ENTER]
[2][ENTER]

2 bays

[1][ENTER] 1

remote

console

Note:

The default is 1 bay and 0 remote consoles.

Note:

When setting up a remote console, # of remote consoles is always set to 0.

4 . 1 . 1 1 . 4 P r o g r a m

R e m o t e

C o n s o l e s

This command is used to program or download information from the controller POS4000 to
remote POS4000s.

To select this command, scroll through the Multiple Unit sub-menu until "Prog Remote Consoles"
appears and then press [ENTER].