Unitec POS4000/V2-Wash Select II - Manual (Page 106)

P O S 4 0 0 0
Document Number: POS4007 80
Figure 6. Installing the Printer Ribbon and Cassette
7.1.4 Loading and Changing the Paper
Using Paper Roll:
1. Cut the paper at a right angle to its longitudinal centerline as shown in fig. 7.
2. Insert the paper into insertion inlet on the rear side of the printer.
3. Turn on the power switch and feed the paper by pushing the LF switch.
4. When the paper comes out of the clearance (paper cutter part) on the printer cover, fix
the paper by means of paper holder, then set in on the main unit.
Document Title: POS4000/V2 WSII Operations Manual