3 print accounting report, 5 set prices, Print accounting report – Unitec POS4000/V2-Wash Select II User Manual
Page 80: Set prices

P O S 4 0 0 0
Document Number:
POS4007
54
Document Title:
POS4000/V2 WSII Operations Manual
POS4000 Report Item
Equivalent Item on Wash Select II POS
Token Coins
Tokens:
Note: If you have the Multi coin option and you have
multiple coins programmed. This value will be
based on the number of pulses received.
Example:
WSII programmed as $1 token.
Coin acceptor programmed for $1 token (1 pulse),
$5 token (5 pulses), and $6 token (6 pulses).
If you have received 10 $5 tokens, 5 $6 tokens and
4 $1 tokens then the report will show 84 Token
Coins This is from
(10x5 + 5x6 + 4x1 = 84)
VIP Coupons
Sum of Coupon 1 + Coupon 2 + Coupon 3 under
the VIP Wash Coupons section
Credit Wash (1-4)
Number of transactions involving Credit/Debit cards
or RFID (even if other payment types were also
used)
4.4.3 Print Accounting Report
This command is used to print an accounting report. Accounting information is maintained in 4
levels. Three of the levels can be cleared independently of the other levels; the fourth cannot be
reset. An accounting report consists of two levels printed in adjacent columns.
To select this command, press the [CMD] key followed by the [PRINT REPORT] key. At this
point, you should press [MENU UP/DOWN] until the desired report levels appear (you can print
either the Shift and Manager levels or the Auditor and Non-resettable levels) and then press
[ENTER].
Note:
This command does NOT clear the counts.
Example to print the Accounting report for the Auditor and Non-resettable levels:
[CMD]
[PRINT REPORT]
[MENU DOWN]
[ENTER]
4.5 Set Prices
This command lets you set the prices for each feature (programs, options and
groups). To select this command, press the [CMD] key followed by the [SET
PRICE] key. Then scroll to the secondary menu item of interest and press the
[ENTER] key. The secondary menu items are as follows:
• Set Regular Prices