Metrohm 789 Robotic Sample Processor XL - Manual (Page 66)

3.2 Configuration
58 Metrohm Sample Processor, Operation
be started as soon as input line 7 is activated at the Remote interface (low
level).
The run sequences of the Sample Processor will be stopped when input
line 6 is activated (low level). The technical details can be found in the
8.789.1033 Technical Reference of the Sample Processors.
> auxiliaries
>>running time meter
Submenu for running time meter, open
with
Shows the elapsed time >>running time meter
elapsed time 0.0 h
0…9999 h
Warning limit for running time
meter
>>running time meter
warning OFF h
OFF, 0…9999 hours
The running time meter is used to support the regular mainte-
nance of the Sample Processor. If a warning limit is entered then,
when this period has elapsed, a message will appear indicating
that maintenance is required.
> auxiliaries
device label
Name of the instrument
for identification
8 ASCII characters
>auxiliaries
program 5.789.0011
Program version
read only