Metrohm 789 Robotic Sample Processor XL - Manual (Page 56)

2.4 Connecting up accessories
48 Metrohm Sample Processor, Installation
Fig. 29 Sample rack for XL models
Sample racks for the 789 Robotic Sam-
ple Processor XL (48 cm dia.) have a
handle with fixing screws. This handle is
used to fix the rack on the Sample
Processor turntable by turning it clock-
wise.
2.4.11 Mounting the safety shield
It is essential that the safety shield is mounted before the Sample
Processor is used for the first time. Not only does it provide an
effective protection against splashes, but it also considerably re-
duces the risk of injury.
Various versions of the safety shield are available.
The safety shield is mounted on the Sample Processor tower with
the screws provided. The position of the safety shield can be
modified to suit the height of the sample beakers.
Fig. 30 Mounting the safety shield
Fig. 31 Safety shield for Swing Heads
Attachment screw