Metrohm 789 Robotic Sample Processor XL User Manual

Page 24

1.7 The keypad

Metrohm Sample Processor, Introduction

Editing and sequence control

INSERT

DELETE

When editing a method sequence the and
keys are used to insert or delete a command line.

RESET

CLEAR

The key is used to initialize the Sample Processor
and dosing devices. This corresponds to the switching-on process.

During data input the key is used to de-
lete an entry or to reset the default value. In text entry mode

the last character is deleted.

QUIT

During a method sequence the key can be used to termi-
nate the command which is currently being carried out. The following

command is executed.

During data input the key is used to terminate an en-

try. During navigation in a menu the key is used to
exit the active (sub)menu and select the next highest menu

level.

ENTER

During data input the key is used to accept the entry.

Command keys

SAMPLE

The key is used to set the current sample position. This
has to be done before a sample series is run.
At the start of a method this position is assumed to be the first sample

in a series. If no sample position has been set then the Sample Proc-
essor will select rack position 1.

MOVE

With a vessel or a particular rack position can be moved to

the active tower or a robotic arm can be swung to an external position.

The