Metrohm 789 Robotic Sample Processor XL User Manual
Page 29
1.7 The keypad
Metrohm Sample Processor, Introduction
21
Auxiliary commands
.
<
The
selected: parameter report (method), configuration report, list of
stored methods, all reports.
The type of report can be selected with .
e. g.
Print: config
The selection of the printer type and the settings of the RS232 inter-
face must be made in the configuration menu under
>RS232 Set-
tings
, see p. 37.
>
*
RACK
-
With the
nected peripheral devices (e.g. Dosimats, Dosinos) are not affected
by this.
The sample rack and lift (both lifts in 2-tower versions) are moved to
the zero position and automatic rack recognition is carried out.
This manual is related to the following products: