Metrohm 790 Personal IC - Manual (Page 94)

4.3 Systems
790 Personal IC
85
INJECT done Injection valve has been switched to the
"INJECT" position.
Finished Determination has been finished.
Executing *.smt [*.que] The sample queue *.que is processed using the
system file
*.smt
.
SHUTDOWN 790 Personal IC hardware is shutdown.
Error messages
Detection of hard-
ware failed Bad connection between PC and 790 Personal
IC or instrument switched off (check connecting
cable or switch on instrument).
E1 Program checksum wrong (call Metrohm
service).
E2 RAM faulty (call Metrohm service).
E200 Invalid instrument adjustment (call Metrohm
service).
E237 Storage of configuration values failed (repeat last
action; if error reappears, call Metrohm service).
E238 Storage of instrument number failed (repeat last
action; if error reappears, call Metrohm service).
E240 EEPROM faulty (call Metrohm service).
E258 Storage of setup values failed (repeat last action;
if error reappears, call Metrohm service).
E295 Storage of memory values failed (repeat last
action; if error reappears, call Metrohm service).
E296 Instrument stopped (restart instrument; if error
reappears, call Metrohm service).
E298 Storage of flow correction value failed (repeat
last action; if error reappears, call Metrohm
service).
E299 Storage of break time values failed (repeat last
action; if error reappears, call Metrohm service).
E300 High-pressure pump faulty (restart pump; if error
reappears, call Metrohm service).
E301 Injection valve blocked (check injection valve; if
error reappears, call Metrohm service).
E302 Suppressor module blocked (check suppressor;
if error reappears, call Metrohm service).
E303 Storage of maintenance information failed
(repeat last action; if error reappears, call
Metrohm service).