Metrohm 790 Personal IC - Manual (Page 31)

2 Installation
790 Personal IC
22
2.5.3 Basic settings
When the program is started for the first time several basic settings
must be made for the 790 Personal IC. Proceed as follows:
1 Start program
• Double-click the software icon to start the program. The
program window with the opening picture is opened and the
Log In window appears on the screen:
• Do not enter any password here, just click on . The
following window appears:
• Enter company, division and name and click on . This
window appears only one time after software installation.
2 COM port settings
This step must only be carried out if a different COM interface
from COM1 or COM2 is used for connection to the 790 Personal
IC.
• Click on Options / 790 Personal IC:COM1 to open the Links
window: