Metrohm 790 Personal IC - Manual (Page 51)

2 Installation
790 Personal IC
42
1
3
2
96 96 96 96
100 100 100 100
98 98 98 98
97 97 97 97 99 99 99 99
101 101 101 101
Fig. 16: Connections at suppressor module
5 Inlet capillary for H
2
O
• Attach inlet capillary 80 80 80 80 marked with "H
2
O" of suppressor
module 39 39 39 39 using a 6.2744.010 Compression fitting to the filter
unit PEEK 28 28 28 28 connected to the front pump tubing 75 75 75 75.
6 Outlet capillary for H
2
O
• Pull outlet capillary 82 82 82 82 marked with "Waste" of the suppressor
module 39 39 39 39 from below through one of the openings 6666 out of
the inner compartment of the 790 Personal IC.
• Lead outlet capillary 82 82 82 82 to a sufficiently large waste container
and fix it in place.
7 Fasten capillaries to the side walls
• If necessary, the two aspirating tubings 71 71 71 71 and 72 72 72 72 can be
fixed in the required position in the interior with the help of a
Y.107.0150 self-adhesive strap.
• If necessary, the two outlet capillaries 82 82 82 82 and 83 83 83 83 can be fixed
in the required position in the interior with the help of a
Y.107.0150 self-adhesive strap.
78 78 78 78 Suppressor inlet
capillary for eluent
79 79 79 79 Suppressor outlet
capillary for eluent
80 80 80 80 Suppressor inlet
capillary for H
2
O
81 81 81 81 Suppressor inlet
capillary for H
2
SO
4
82 82 82 82 Suppressor outlet
capillary for H
2
O
83 83 83 83 Suppressor outlet
capillary for H
2
SO
4
Eluent
H
2
O
Detector
Waste
Waste
H
2
SO
4