Metrohm 790 Personal IC - Manual (Page 18)

1.2 Parts and controls
790 Personal IC
9
1 Door to interior 32 Aspirating capillary
Connection for 6.1834.010 aspirating
tubing
18 Inlet capillary for injector
PEEK capillary,
length L = 24 cm
33 Fastening screws
for pump head 34
19 Mounting rail
for 6.2027.0X0 column holder
34 Pump head (6.2824.100)
20 Column connection capillary
PEEK capillary,
length L = 30 cm
35 Connection capillary
Connection pump head – purge
valve, fixed mounting
21 Sample loop 20 µµµµL
6.1825.210 PEEK sample loop
36 Connection capillary
in pump head, fixed mounting
22 Injection valve 37 Inlet capillary for detector block
PEEK capillary, fixed mounting
23 Aspirating tubing
PTFE tubing for aspirating the sample;
length L = 65 cm
38 Detector block (1.732.0110)
24 Coupling (6.2744.120)
for connection of the 6.2816.020 syringe
39 Suppressor module
(inlet and outlet capillaries are not
shown)
25 Syringe tubing
PTFE tubing for connection of the
syringe,
length L = 35 cm
40 Tubing cartridge (6.2755.000)
for 6.1826.060 pump tubing
26 PEEK coupling (6.2744.040) 41 Contact pressure lever
for adjusting the contact pressure
27 Connection capillary
PEEK capillary,
length L = 13 cm
42 Holding clamp
for locking the tubing cartridge into
place
28 Filter unit PEEK (6.2821.100) 43 Snap-action lever
for releasing the tubing cartridge
29 Connection capillary
PEEK capillary,
length L = 13 cm
44 Pump drive
roller head with contact rollers
30 Connection capillary
PTFE capillary for connection of the
6.2816.020 syringe,
length L = 70 cm
45 Mounting pin
for attaching the tubing cartridges
31 Purge valve