Metrohm 790 Personal IC - Manual (Page 156)

4.7 Batch reprocessing
790 Personal IC
147
Recalculate only Enable recalculation of chromatograms with
values for Volume , Dilution , Amount and Internal
standard amount entered in the batch reprocess-
ing table.
The recalculation is done automatically if the
Reintegrate and/or Recalculate options are
enabled. If the Recalculate only option is
enabled, the Reintegrate and Recalculate
options are disabled automatically.
Change passport
If this option is enabled, those parameters of
the passport which have been changed after
clicking the button are applied to
all chromatograms.
Open the Passport window for modification of
the passport parameters.
Only some of the passport parameters can be
modified. The passport parameters Ident ,
Sample Info 1 and Sample Info 2 entered in the
batch reprocessing table are overwritten if
these values are modified in the Passport
window.
Modify chromatogram appearance
If this option is enabled, the chromatogram Ap-
pearance parameters which have been changed
after clicking the button are
applied to all chromatograms.
Open the Appearance window for modification of
the settings for chromatogram axes, labels and
colors.
Make report Print report for all chromatograms using the
current report settings of the selected chroma-
togram in the Use method... field.
Open the Report options window for modification
of the report settings.
Start reprocessing.
Combine all chromatograms of the batch re-
processing queue into a single multi-channel
chromatogram.
Close the Reprocess window.