Metrohm 790 Personal IC - Manual (Page 65)

3 Operating tutorial
790 Personal IC
56
13 Modify integration parameters
⇒ Click on or select Integration from the Method menu in
the main window to open the integration parameters window.
⇒ If required (e.g. if the lithium peak is not detected), change
the time delay
Delay
before starting peak integration.
⇒ Click on . The Integration parameters window is opened
and the chromatogram is reintegrated.
⇒ Repeat this procedure for all other integration parameters
until the result satisfies your expectations. Click on for
each parameter change.
⇒ Close the Integration parameters window with .