Bowers Group Sylvac D100S Readouts - Manual (Page 4)

D100S DISPLAY UNIT
1.1 GENERAL DESCRIPTION
The D100S unit displays the absolute displacement of the long-travel Sylvac probes P5, P10, P25, P50. Highest reso-
lution is 0.1 µm. It also allows for OptoRS simplex or duplex instruments to be seen. Numerous integrated functions will
resolve most metrological problems, be they in the workshop or laboratory. The 8200 points backlit graphic read out
provides tremendous flexibility and ease of use. Similarly, it allows the unit to be used simply and in a choice of 3 lan-
guages. All readings entered are protected from erasure if the unit is switched off (when switched back on, the unit returns
exactly to the point where it was switched off, and the probe's position is retained). The numerous inputs/outputs of the
unit, as well as its modest dimensions and ability to function from batteries allow it to be incorporated in a great variety
of industrial locations.
A 230V, 120V or 100V charging block is supplied with the unit.
By means of complementary multichannel units it is possible to connect from 2 to 64 probes to just one D100S unit
and/or 2 to 16 Sylvac Opto-RS232 instruments (max. 64 channels). Each probe connected can be individually selec-
ted, as well as automatic scanning with comparison of tolerances.
The pneumatic unit D110 (vacuum unit D110V) enables from 1 to 16 probes to be lifted. The maximum lifting capa-
city will be 64 probes using 3 additional units D111 (D111V for vacuum system).
1.2 FRONT OF UNIT
3
LCD display, CCFL backlight Function keys
(sound acknowledgement)
On/Off switch