Bowers Group Sylvac D100S Readouts - Manual (Page 39)

38
c/ printing of statistical values with tolerances active (printing therefore of 2nd statistical display and histogram) and
with complete header. After printing, the unit will ask if you wish to print stored values, as in the example below. If the
stored values are printed, the unit will then request whether they should be kept (—> press ENTER) or if they should be
erased from memory of the channel in operation (—> press CLEAR):
SYLVAC SA
Piece ident. : SHAFT
Drawing nbr : PM230.010.412
Work station : L 201
Date : 12/11/1998 Time : 14:41
CHANNEL 1
N 30 Xmax 8.361 Xmin 8.338 R 0.023 Xbar 8.352
Sigma 0.0063 s 0.0064 -3 S 8.333 +3 S 8.371
- NG 1 + NG 0 %Def 3.333
Cp 0.7933 Cpk 0.6433 Cm 0.7800 Cmk 0.6325
0 + NG
ULT -------------------------------------------------------- 8.3700
0
8.3640
########################################### 7
8.3580
######################################################## 9
8.3520
######################################################## 9
8.3460
######################### 4
LLT -------------------------------------------------------- 8.3400
******* 1 - NG
1 8.342 2 8.342 3 8.350 4 8.359 5 8.359
6 8.358 7 8.342 8 8.344 9 8.354 10 8.348
11 8.356 12 8.360 13 8.360 14 8.357 15 8.353
16 8.351 17 8.348 18 8.350 19 8.353 20 8.349
21 8.349 22 8.349 23 8.350 24 8.354 25 8.353
26 8.338 27 8.361 28 8.361 29 8.361 30 8.354