Bowers Group Baty - Digital Tyre Tread Depth Gauge User Manual
Digital tyre tread depth gauge instructions, Digital tyre tread depth gauge, Specifications
Digital Tyre Tread Depth Gauge
DIGITAL TYRE TREAD
DEPTH GAUGE INSTRUCTIONS
Specifications:
Measuring range:
0-1.0"/0-25mm
Resolution:
0.0005"/0.01mm
Accuracy:
0.001"/0.02mm
Repeatability:
0.001"/0.02mm
Measuring system:
Capacitive
Display:
LCD (10.0mm high)
Maximum measuring speed:
120"/3m per second
Battery:
3V.type CR 2032 Lithium
Battery life:
Approx. 1 year
Working temperature:
0 - 40°C
Maximum relative humidity:
80%
Functions:
•
ON/OFF: Press
•
Zero setting: Press
•
Change measuring mode: Press
•
HOLD: Press
mode press this button again
Battery replacement:
•
Slide off the battery cover and rubber gasket, then remove the battery by gently tapping
the instrument in your hand. (Never try to force or pry the battery out.) Insert the new
battery with the positive pole “+” facing upwards and replace the gasket and cover
•
Please dispose of used batteries at a proper collection centre
Cleaning:
•
Clean this Tyre Gauge with a soft cloth
•
DO NOT use any type of solvent
•
DO NOT immerse this Tyre Gauge in liquid
Troubleshooting:
RESET: In order to RESET the instrument, remove the battery, wait 30 seconds,
replace the battery and turn the instrument on.
Precautions: Although a top quality product, certain precautions are required
for any electronic instrument.
•
Avoid exposure to all liquids and excessive humidity
•
Avoid exposure to electromagnetic fields
•
Do not expose the instrument to direct sunlight
•
Do not attempt to disassemble this Tyre Gauge for extended periods of time
Symptom
•
Digits do not change or
count correctly
•
No display
Corrective Action
•
Remove the battery for 30
seconds then reinstall
•
Check battery contacts or
replace battery
For more information visit
www.baty.co.uk
precision measuring instruments
Battery cover
Display
Slider
Measuring bar
Instruction_Leaflet_176-01DTG_baty 22/07/2010 14:07 Page 1