beautypg.com

Before connecting with usb, Driver mode, Setting usb-related functions – Boss Audio Systems GS-10 User Manual

Page 78: Adjusting the recording level (output level), Adjusting the playback volume level (input level), Chapter 9, Using the gs-10, Connected to a computer via usb, Usb button (p. 78)

background image

78

Chapter 9 Using the GS-10 Connected to a Computer Via USB

Before Connecting with USB

With the GS-10, you can use USB to transmit both digital
audio signals and MIDI messages between the GS-10 and
your computer.

This requires installation of a USB driver on your computer
so that it can work with the GS-10’s driver mode settings.

For instructions on installing the driver, please read
“Installing & Setup the USB Driver” (p. 125).

fig.09-009

Driver Mode

The GS-10 features two operational modes, one mode that
uses the special driver on the CD-ROM included with the
GS-10 and another mode that uses the operating system’s
(Windows/Mac OS) standard drivers.

The special driver provides high-quality sound and stable
timing for audio recording, playback, and editing.

In addition, the driver enables you to control the GS-10 with
MIDI messages and connect external MIDI devices to your
computer.

Setting USB-Related Functions

Adjusting the Recording Level
(Output Level)

This adjusts the volume level of the digital audio output to
the USB and DIGITAL OUT connectors.

1. Press [USB].

2. Press PARAMETER [

] [

] so that “Out Levl” is

displayed.

fig.09-010d

3. Rotate the PATCH/VALUE dial to set the output level.

4. Press [EXIT] to return to the Play screen.

Adjusting the Playback Volume
Level (Input Level)

This adjusts the volume level of the digital audio input from
the USB connector.

1. Press [USB].

2. Press PARAMETER [

] [

] so that “Input

Level” is displayed.

fig.09-020d

3. Rotate the PATCH/VALUE dial to set the input level.

4. Press [EXIT] to return to the Play screen.

Computer