Boss Audio Systems GS-10 - Manual (Page 158)

158
Installing & Setting Up the Driver (Macintosh)
Settings the sound input/output
1.
From the Apple menu, select “Control Panel” – “Sound.”
The “Sound” dialog box will appear.
fig.11-640
The “Sound” dialog box will appear.
2.
Click the “Speakers” tab or “Speaker” Settings.
fig.11-650
3.
With the volume turned down on the GS-10 and on your peripheral audio
equipment, click [Start Test].
Test signals will be output from the GS-10; left first, then right, as indicated in the screen.
fig.11-660
4.
In the Sound dialog box, click the “Input” tab.