Boss Audio Systems GS-10 - Manual (Page 129)

129
Installing & Setting Up the Driver (Windows)
fig.11-060
14.
Select “Don’t search. I will choose the driver to install”, and click [Next].
fig.11-070
15.
Make sure that the “Model” field indicates “BOSS GS-10”, and click [Next].
Driver installation will begin.
The Insert Disk dialog box will appear.
fig.11-090
16.
Click [OK].
The “Files Needed” dialog box will appear.
If the “What action do you want Windows to take?” setting in step 4 was not set to “Ignore”, a
“Hardware Installation” dialog box will appear.
fig.11-080
If the [Continue Anyway] button appears, click the [Continue Anyway] button to continue with
the installation.
If you are unable to continue, click [STOP Installation] or [OK] to begin the driver installation over
again from Step 1.
The Insert Disk dialog may not
appear. In that case, proceed to
step 17.