Boss Audio Systems GS-10 - Manual (Page 12)

12
Panel Descriptions
Rear Panel
fig.00-042
1. MIC INPUT Jack/Connector
Input jack/connector for use with mics. Both standard
TRS type and XLR type are provided.
* Use only one of these jacks at a time.
* Not compatible with phantom power.
2. AUX INPUT Jacks L/R
Used for connecting a CD player or similar audio
device, rhythm machine, sound module, or similar
devices.
3. OUTPUT Jacks L/R
Used for connecting to an audio set, recorder, mixer, or
similar equipment.
4. GUITAR AMP OUT Jack
Connect your guitar amp here.
5. EXP PEDAL/CTL 1,2
(Expression Pedal/Control Pedal 1,2) Jack
Connect an optional expression pedal (such as the EV-
5) or foot switch (such as the FS-5U) here.
6. DIGITAL OUT Connector
Outputs digital audio signals.
7. USB Connector
Use a USB cable to connect this connector to your
computer to exchange data between the GS-10 and the
computer.
8. MIDI IN/OUT Connector
Connect an external MIDI device to these connectors to
transmit and receive MIDI messages
9. POWER switch
Turns the power on and off.
10. AC Adaptor Jack
Connect the included AC adaptor (BRC series) here.
11. Cord Hook
Hook the AC adaptor cord here to prevent the adaptor
plug from being disconnected.
12. Security Slot ( )
http://www.kensington.com/
2 4 6
3 1 5 7 10
9 11 12
8