Boss Audio Systems GS-10 - Manual (Page 141)

141
Installing & Setting Up the Driver (Windows)
Driver settings
■ About the input/output devices
Audio output devices
BOSS GS-10
This sends audio data from the computer to the GS-10. This is the setting you will normally use, such
as when using the GS-10 with Media Player. You will also select this setting when using an
application such as SONAR in WDM driver mode, or when using a DirectSound application.
MME BOSS GS-10 Out (Windows XP/2000 only)
This sends audio data from the computer to the GS-10. Use this setting if you want to use 24-bit audio
with an application that does not have a WDM driver mode or does not support ASIO (such as Cool
Edit).
Audio input devices
BOSS GS-10
This receives audio data sent by the GS-10 to the computer. This is the setting you will normally use.
You will also select this setting when using an application such as SONAR in WDM driver mode.
MME BOSS GS-10 In (Windows XP/2000 only)
This receives audio data sent by the GS-10 to the computer. Use this setting if you want to use 24-bit
audio with an application that does not have a WDM driver mode or does not support ASIO (such
as Cool Edit).
ASIO device
If you are using the GS-10 with an ASIO-compatible application such as Cubase, select “BOSS GS-
10” as the ASIO setting on your application.
* To prevent an audio oscillation loop or double monitoring, turn monitoring Off in your application, or use
ASIO Direct Monitor.
MIDI output devices
BOSS GS-10 MIDI OUT
This transmits MIDI data from the computer to the GS-10. Transmitted MIDI data is output from the
GS-10’s MIDI OUT connector.
BOSS GS-10 Control
This transmits MIDI data from the computer to the GS-10. You can control the GS-10’s operations
using MIDI data.
MIDI input devices
BOSS GS-10 MIDI IN
This accepts MIDI data transmitted from the GS-10 to the computer. MIDI data input to the GS-10’s
MIDI IN connector is transmitted to the computer.
BOSS GS-10 MIDI Control
This accepts MIDI data transmitted from the GS-10 to the computer. Data for the GS-10’s operations
and performance data is transmitted to the computer.