Boss Audio Systems GS-10 - Manual (Page 11)

11
Panel Descriptions
TAP Button
Use this when setting the delay time with the tap input.
(p. 33)
6. CHORUS (p. 21, p. 34)
LEVEL Knob
Adjusts the volume level of the chorus sound.
CHORUS On/Off Button
Press to change the settings.
7. REVERB (p. 21, p. 34)
LEVEL Knob
Adjusts the volume level of the reverb sound.
REVERB On/Off Button
Press to change the settings.
8. FX-1 (p. 36)
FX-1 On/Off Button
Press to change the settings.
9. FX-2 (p. 41)
FX-2 On/Off Button
Press to change the settings.
10. EQ (Equalizer) (p. 35)
EQ On/Off Button
Press when changing the settings.
11. NAME/NS/MASTER Button (p. 24, p. 53)
Use for naming patches (NAME), setting the noise
suppressor (NS), and making the master settings
(MASTER).
12. ASSIGN Button (p. 60)
Use this to make settings for the expression pedal and
control pedal.
13. INPUT SELECT Button
Selects the input signal to which the effect is applied.
14. QUICK FX Button (p. 22)
Using the Quick Settings lets you complete the settings
procedure quickly and easily.
15. PATCH/VALUE Dial
Use this when switching patches and changing the
values of settings.
16. PARAMETER Buttons
Press to select parameters.
* To jump to the main parameters, hold down one of these
buttons while you press the other. With items for which there
aren’t that many parameters, the GS-10 jumps to the last (or
initial) parameter.
17. EXIT Button
Use this to undo operations.
18. WRITE Button
Press to store settings.
19. AUX INPUT LEVEL Knob
Adjusts the volume of the input from the AUX INPUT
jack.
* Setting the input level too high may result in oscillation.
20. OUTPUT LEVEL Knob
Adjusts the GS-10’s output level and the unit’s speaker
volume.
21. USB Button (p. 78)
Used when making USB-related settings.
The indicator lights when the GS-10 is connected to
your computer.
22. SPEAKER ON/OFF Button (p. 15)
Switches the GS-10’s speakers on and off.
23. METER Button (p. 67)
Press to use the meter function.
24. SYSTEM Button
Use for making settings for the GS-10’s overall
operating environment.
25. TUNER Button (p. 64)
Press to use the tuner function.
26. DIRECT PATCH Button (p. 18)
Allows you to directly call up your favorite patches
registered in the GS-10.
27. PHONES Jack
Connect the stereo headphones here.
28. GUITAR/BASS Jack
The guitar or bass is connected here.