Boss Audio Systems GS-10 User Manual
Page 161
161
Installing & Setting Up the Driver (Macintosh)
8.
In the Output tab, set “Choose a device for sound output” to “GS-10.”
fig.11-700
9.
In the Input tab, set “Choose a device for sound input” to “GS-10.”
fig.11-710
The “Main Volume” slider will
not move.
Cautions when using the GS-10
Before you use your software, please note the following points.
• Select “GS-10” in the audio driver setting of your software. For details, refer to the manual
that came with your software.
• Connect the GS-10 to your computer via a USB cable before you start up your sequencer or
other software.
• Do not disconnect the USB cable from the GS-10 while your sequencer or other software is
running.
• Disconnect the USB cable from the GS-10 only after you have quit your sequencer or other
software.
• Leave the Sleep function of your Macintosh turned off.
• The GS-10 will not work in the Classic environment of Mac OS X. Use the GS-10 when the
Classic environment is not running.