Boss Audio Systems GS-10 - Manual (Page 159)

159
Installing & Setting Up the Driver (Macintosh)
5.
In “Choose a source for sound input (Device),” select “USB audio.”
fig.11-670
* Do not check “Play sound through output device”.
6.
When you are finished making settings, close the “Sound” dialog box.
7.
From the File menu, select “Quit.”
If USB audio is not displayed,
close the “Sound” dialog box,
and disconnect the GS-10’s
USB cable from the Macintosh.
Perform the driver installation
(p. 157) once again.