Boss Audio Systems GS-10 - Manual (Page 153)

153
Installing & Setting Up the Driver (Macintosh)
14.
If a MIDI sound module is connected to the GS-10’s MIDI OUT connector, click
the GS-10 MIDI IN,OUT icon in the setting window.
If you hear sound, the settings have been made correctly.
fig.11-540
GS-10 MIDI IN,OUT corresponds to the GS-10’s MIDI IN,MIDI OUT. GS-10 CONTROL corresponds
to the GS-10’s control port
15.
After you have verified this, and exit FreeMIDI Setup.
16.
Make MIDI device settings on your sequencer software.
For details on settings, refer to the manual that came with your software.
→ Next, you need to install the ASIO driver (p. 154).