Boss Audio Systems GS-10 - Manual (Page 59)

59
Chapter 6 Setting the External Pedal Functions
Section 6
Setting the External Foot Switch
Functions (Control 1, 2 Function)
* When connecting two foot switches using the special optional
Roland PCS-31 connector cord, the foot switch connected with
the white-banded plug functions according to the Control 1
function settings, and the foot switch connected with the red-
banded plug functions according to the Control 2 function
settings.
* When you have only one foot switch connected, the Control 1
function settings are used.
fig.06-002
1. Press [SYSTEM], then press PARAMETER [ ]
[ ] so that “CTL 1 Func” or “CTL 2 Func” is
displayed.
fig.07-120d
2. Rotate the PATCH/VALUE dial to set the foot switch
function.
Assign 1-8:
The controller set in each patch’s Assign (p. 60) is used.
Tuner On/Off:
The foot switch is used as a tuner On/Off switch.
Use a momentary-type foot switch (such as the optional
FS-5U).
Remote Strt/Stop:
Used as a foot switch for use in starting and stopping a
computer or a recorder, sequencer, or other MIDI-
connected device.
For more on the settings for the device being run, refer to
“Controlling Recorders and Sequencers Remotely from
the GS-10 (Remote Control)” (p. 75).
Direct Patch Up:
The direct patch (p. 18) number increases by 1 each time
the foot switch is pressed.
Direct Patch Down:
The direct patch (p. 18) number decreases by 1 each time
the foot switch is pressed.
Patch Up:
The patch (p. 18) number increases by 1 each time the
foot switch is pressed.
Patch Down:
The patch (p. 18) number decreases by 1 each time the
foot switch is pressed.
Patch Level Inc1:
The patch level (p. 54) value increases by 10 each time
the foot switch is pressed.
Patch Level Inc2:
The patch level (p. 54) value increases by 20 each time
the foot switch is pressed.
Patch Level Dec1:
The patch level (p. 54) value decreases by 10 each time
the foot switch is pressed.
Patch Level Dec2:
The patch level (p. 54) value decreases by 20 each time
the foot switch is pressed.
3. Press [EXIT] to return to the Play screen.
1 3
2 1