Oc (octave), Pb (pedal bend), 2ce (2x2 chorus) – Boss Audio Systems GS-10 User Manual
Page 45: Feedback, Level, Direct level, Range, Octave level, Pitch min, Pitch max
45
Chapter 4 Introduction to Effects and Parameters
Section 4
* When set to BPM, the value of each parameter will be set
according to the value of the Master BPM (p. 54) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the time to
twice or four times the time length of the BPM when the set
time is increased).
When setting to BPM, press PARAMETER [
] to display
the Master BPM settings screen.
Feedback
This adjusts the feedback amount of the pitch shift sound.
Level
Adjusts the volume.
Direct Level
This adjusts the volume of the direct sound.
OC (Octave)
This adds a note one octave lower, creating a richer sound.
Parameter
Value
Range
Range 1–Range 4
Octave Level
0–100
Direct Level
0–100
Range
This selects the pitch range for the input sound to which you
want to add the effects.
The range to which the affect is applied changes with the
Input Select (p. 19) value.
Octave Level
This adjusts the volume of the sound one octave below.
Direct Level
Adjusts the volume of the direct sound.
PB (Pedal Bend)
This lets you use the pedal to get a pitch bend effect.
The expression pedal automatically switches to the pedal
bend function when PB is selected.
“Setting the External Expression Pedal Functions (Expression
Pedal Function)” (p. 58).
Parameter
Value
Pitch Min
-24–+24
Pitch Max
-24–+24
Pdl Position
0–100
Effect Level
0–100
Direct Level
0–100
Pitch Min
This sets the pitch at the point where the expression pedal is
fully lifted.
Pitch Max
This sets the pitch at the point where the expression pedal is
all the way down.
Pdl Position (Pedal Position)
This adjusts the pedal position for pedal bend.
Effect Level
This adjusts the volume of the pitch bend sound.
Direct Level
Adjusts the volume of the direct sound.
2CE (2x2 Chorus)
Two separate stereo chorus units are used for the low-
frequency and high-frequency ranges in order to create a
more natural chorus sound.
Parameter
Value
Xover f
100 Hz–4.00 kHz
Lo Rate
0–100, BPM
–BPM
Lo Depth
0–100
Lo PreDly
0.0 msec–40.0 msec
Lo Level
0–100
Hi Rate
0–100, BPM
–BPM
Hi Depth
0–100
Hi PreDly
0.0 msec–40.0 msec
Hi Level
0–100
Input
Select
Guitar
Microphone
USB (Gtr/Mic)
AUX
Bass
USB
Range 1
7th string, open (B) to
1st string, 24th fret (E)
Low B, open (B) to
High C, 24th fret (C)
Range 2
7th string, open (B) to
1st string, 12th fret (E)
Low B, open (B) to 1st
string, 19th fret (C)
Range 3
7th string, open (B) to
1st string, open (E)
Low B, open (B) to 1st
string, 9th fret (E)
Range 4
7th string, open (B) to
4th string, 2nd fret (E)
Low B, open (B) to 2nd
string, 2nd fret (E)