Rockwell Automation 20B PowerFlex 70, PowerFlex 700 Reference Manual - Manual (Page 108)

Input Devices
108 Rockwell Automation Publication PFLEX-RM001H-EN-P - June 2013
The User Display
The User Display is shown when module keys have been inactive for a
predetermined amount of time. The display can be programmed to show
pertinent information.
Setting the User Display
Setting the Properties of the User Display
The following HIM parameters can be set as desired:
•
User Display - Enables or disables the user display.
•
User Display 1 - Selects which user display parameter appears on the top line
of the user display.
•
User Display 2 - Selects which user display parameter appears on the bottom
line of the user display.
•
User Display Time - Sets how many seconds will elapse after the last
programming key is touched before the HIM displays the user display.
Input Devices Contactors
See Motor Start/Stop Precautions on page 120
Circuit Breakers / Fuses
See Fuses and Circuit Breakers on page 106
Filters, EMC
Refer to CE Conformity on page 63 .
Step Key(s) Example Displays
1. Press the Up Arrow or Down Arrow to scroll to
Operator Intrfc. Press Enter.
2. Press the Up Arrow or Down Arrow to scroll to User
Display. Press Enter.
3. Select the desired user display. Press Enter. Scroll to
the parameter that the user display will be based on.
4. Press Enter. Set a scale factor.
5. Press Enter to save the scale factor and move to the
last line.
6. Press the Up Arrow or Down Arrow to change the
text.
7. Press Enter to save the new user display.
Sel
Operator Intrfc:
Change Password
User Display
Parameters