Rockwell Automation 20B PowerFlex 70, PowerFlex 700 Reference Manual - Manual (Page 107)

Grounding, General
Rockwell Automation Publication PFLEX-RM001H-EN-P - June 2013 107
Grounding, General
Refer to “ Wiring and Grounding Guidelines for PWM AC Drives,” publication
DRIVES-IN001.
HIM Memory
See Copy Cat on page 65 .
HIM Operations Selecting a Language
See also Language on page 111 . PowerFlex 700 drives support multiple
languages. When you first apply drive power, a language screen appears on the
HIM. Use the Up or Down Arrow to scroll through the available languages. Press
Enter to select the desired language. To switch to an alternate language, follow
the steps below.
Using Passwords
By default the password is set to 00000 (password protection disabled).
Logging in to the Drive
Logging Out
To change a password
Step Key(s) Example Displays
1. Press ALT and then the Up Arrow (Lang). The
Language screen will appear.
2. Press the Up Arrow or Down Arrow to scroll through
the languages.
3. Press Enter to select a language.
Step Key(s) Example Displays
1. Press the Up or Down Arrow to enter your password.
Press Sel to move from digit to digit.
2. Press Enter to log in.
Step Key(s) Example Displays
You are automatically logged out when the User
Display appears. If you want to log out before that,
select “log out” from the Main Menu.
Step Key(s) Example Displays
1. Use the Up Arrow or Down Arrow to scroll to Operator
Intrfc. Press Enter.
2. Select “Change Password” and press Enter.
3. Enter the old password. If a password has not been
set, type “0.” Press Enter.
4. Enter a new password (1- 65535). Press Enter and
verify the new password. Press Enter to save the new
password.
ALT +
Speak English?
Parlez Francais?
Spechen Duetsch?
Plare Italiano?
Login: Enter
Password
9999
Operator Intrfc:
Change Password
User Display
Parameters
Password:
Old Code: 0
New Code: 9999
Verify: 9999