Rockwell Automation 1440-VSE02-01RA XM-122 gSE Vibration Module - Manual (Page 141)

Publication GMSI10-UM013D-EN-P - May 2010
DeviceNet Objects 131
Instance 199 - Dynamic Assembly
This Assembly instance can be created and configured with the XM Serial
Configuration Utility or RSMACC Enterprise Online Configuration Utility.
Using the configuration software, you determine the format of the data. This
assembly instance can be selected to be sent in response to an I/O Poll request
from a Master.
The dynamic Assembly can include all of the measurement values included in
Assembly instance 101. In addition, the dynamic Assembly can include the
following configuration parameters.
28 - 31 Channel 1 Band 1 value
32 - 35 Channel 2 Band 1 value
36 - 39 Channel 1 Band 2 value
40 - 43 Channel 2 Band 2 value
44 - 47 Channel 1 Band 3 value
48 - 51 Channel 2 Band 3 value
52 - 55 Channel 1 Band 4 value
56 - 59 Channel 2 Band 4 value
60 - 63 Channel 1 Sum Harmonics value (AIP Object Instance #7)
64 - 67 Channel 2 Sum Harmonics value (AIP Object Instance #8)
68 - 71 Channel 1 Not 1X value (AIP Object Instance #3)
72 - 75 Channel 2 Not 1X value (AIP Object Instance #4)
76 - 79 Channel 1 Vector 1 Phase value
80 - 83 Channel 2 Vector 1 Phase value
84 - 87 Channel 1 Vector 2 Phase value
88 - 91 Channel 2 Vector 2 Phase value
92 - 95 Channel 1 Vector 3 Magnitude value
96 - 99 Channel 2 Vector 3 Magnitude value
100 - 103 Channel 1 Gap value (AIP Object Instance #1)
104 - 107 Channel 2 Gap value (AIP Object Instance #2)
108 - 111 Maximum Speed value
112 - 115 Channel 1 gSE Overall value (AIP Object Instance #5)
116 - 119 Channel 2 gSE Overall value (AIP Object Instance #6)
120 - 123 Acceleration value
Table C.16 Instance 103 Data Format (Measurement Values Assembly)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0