Rockwell Automation 7000 PowerFlex Medium Voltage AC Drive (B Frame) - Classic Control - Manual (Page 90)

Operator Interface 3-11
7000 “B” Frame 7000-UM150I-EN-P – June 2013
Top Level Menu
This screen (Figure 3.6) represents the main menu from which all
other screens (and the operations which they perform) are activated.
To activate an operation, simply press the function key
corresponding to the 'Softkey' shown on the screen. A screen for that
operation will be displayed. Refer to the section entitled "How To:"
for information about the various operations which may be
performed.
The screen identifies the drive product to which the operator
interface is attached and its overall state of operation. Four digital
meters show four selected parameters located in the drive. A Hobbs
meter displays the number of hours that the drive has been running.
The status of the drive will show one of the following:
NOT READY
– drive is not ready to start
READY – drive will start when commanded
FORWARD RUN – drive is running in the forward direction
REVERSE RUN
– drive is running in the reverse direction
WARNING
– drive has a warning
FAULTED – the drive is faulted
DISCHARGING
– waiting for input filter capacitors to
discharge on a PWM rectifier before
restart
Figure 3.6 – Top Level Menu