Rockwell Automation 1793-OE2S FLEX INTEGRA ANALOG MOD - Manual (Page 3)

Publication 1793-6.5.1 - April 1999
Preface
Using This Manual
Purpose of this Manual This manual shows you how to use your FLEX Integra Analog modules
with Allen-Bradley programmable controllers. The manual helps you
install, program and troubleshoot your modules.
Audience You must be able to program and operate an Allen-Bradley programmable
controller to make efficient use of your FLEX Integra modules. In
particular, you must know how to program block transfers, and be familiar
with DeviceNet or ControlNet software.
Vocabulary We assume that you know how to do this in this manual. If you do not, refer
to the appropriate programming and operations manual before you attempt
to program your modules.
In this manual, we refer to:
– the analog input or analog output module as the “input module” or
“output module”
– the Programmable Controller as the “controller”
Manual Organization This manual is divided into five chapters. The following chart lists each
chapter with its corresponding title and a brief overview of the topics
covered in that chapter.
Chapter Title Contents
1 Overview of FLEX Integra and
Analog modules Describes FLEX Integra Analog modules, features, and how
they function
2 How to Install Your Analog Module How to install and wire the modules
3 Module Programming Explains block transfer programming, sample programs
4 Writing Configuration to and
Reading Status From with a
Remote I/O Adapter Explains how to configure your modules and read status
information from your modules when using a remote I/O
adapter
5 How Communication Takes Place
and I/O Image Table Mapping with
the DeviceNet Adapter Explains how you communicate with your modules, and
how the I/O image is mapped when using a DeviceNet
adapter
6 Input, Status, Output and
Configuration with ControlNet Explains how you communicate with your modules, and
how the I/O image is mapped when using ControlNet.
Appendix Title Contents
A Specifications Specifications for the analog modules