Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 88)

Publication 1403-IN054B-EN-P - August 2001
B-58 DeviceNet Data Tables
Instance 52 Attribute (Snapshot 8 parameter record)
Assembly Structure
7 VARh net Float 4
Range = -9999 x10
21
to 9999x10
21
VARh
13
14
8 Record Timestamp; Year Int 8 Year 15
Record Timestamp; Month, Day Int Month = Value/256
Day = Remainder of Value/256 16
Record Timestamp; Hour, Minute Int Hour = Value/256
Minute = Remainder of Value/256 17
Record Timestamp; Seconds, hSeconds Int Seconds = Value/256
HSeconds = Remainder of Value/256 18
9 Snashot record # being returned Int 2 Range 1 to 265 19
10 Unused Int 2 0 20
Param
# Parameter name Data
Type # bytes Description Word
No.
Attribute
ID Access
Rule Name DeviceNet
Data Type
3 Get Data Structure of
44 bytes; 22 words
Note: this table is only supported when master module
firmware is V3.00 or later
Param
# Parameter name Data
Type # bytes Description Word
No.
1 Avg L-L Voltage (in Delta modes) Float 4
Range = 0 to 9999x10
21
Volts
1
Avg L-N Voltage (in non-Delta modes) 2
2 Average current Float 4
Range = 0 to 9999x10 21 Amps
3
4
3 Total True PF Float 4 Range = -100 to 100% 5
6
4 Total Real Power Float 4
Range = 0 to 9999x10
21
Watts
7
8
5 Frequency Float 4 Range = 0 to 75 Hz 9
10
6 Voltage Unbalance Float 4 Range = 0 to 100% 11
12
7 Current Unbalance Float 4 Range = 0 to 100% 13
14
8 Total Reactive Power Float 4
Range = 0 to 9999x10 21 VAR
15
16