Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 123)

Publication 1403-IN054B-EN-P - August 2001
DeviceNet Data Tables B-93
Common Services
Instance 3 Attributes (General Explicit Server Message
Connection)
Service Code Implemented for: Service Name
Class Instance
0x05 Yes Yes
Reset
(1)
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
(1) For "Class", resets all connections to non-existent. For "Instance", resets connection timer, and if applicable changes the state from timed out to
established.
Attribute ID Access Rule Name DeviceNet Data Value
1 Get State USINT 0=nonexistent
1=configuring (default)
2=waiting for connection
ID 3=established 4=timed
out 5=deferred delete
2 Get Instance Type USINT 0=explicit message
3 Get Transport Class Trigger Byte 0x83
4 Get Produced Connection ID UINT 11101xxxxxx
xxxxxx=node address
5 Get Consumed Connection ID UINT 11110xxxxxx
xxxxxx=node address
6 Get Initial Comm
Characteristics Byte 0x33
7 Get Produced Connection Size UINT 0x80
8 Get Consumed Connection Size UINT 0x80
9 Get/Set Expected Packet Rate UINT 2500 msect
12 Get Watchdog Timeout Action USINT 1=auto delete
13 Get Produced Connection Path
Length UINT 6
14 Get Produced Connection Path:
LogicalSegment, Class
Class Number
Logical Segment, Instance
Instance Number
Logical Segment, Attribute
Attribute Number
Array of:
USINT
0x20
0x04
0x24
4, 6, 8, 10-19, 21, 22,
24-28, 30, 31, 33, 34, 36,
37, 39-49 (multiple
instances supported)
0x30
0x03
15 Get Consumed Connection
Path Length UINT 6