Rockwell Automation 1403-NDNET DeviceNet Communications Card Installation Instructions - Manual (Page 124)

Publication 1403-IN054B-EN-P - August 2001
B-94 DeviceNet Data Tables
Instance 4 Attributes (Predefined Master/Slave COS/Cyclic
Message Connection)
16 Get Consumed Connection
Path:
Logical Segment,Class
Class Number
Logical Segment, Instance
Instance Number
Logical Segment, Attribute
Attribute Number
Array of:
USINT
0x20
0x04
0x24
3, 5, 7, 9, 20, 23, 29, 32,
35, 38 (multiple instances
supported)
0x30
0x03
17 Get Production Inhibit Time UINT 0
Attribute ID Access Rule Name DeviceNet Data Value
Attribute ID Access Rule Name DeviceNet Data Value
1 Get State USINT 0=nonexistent
1=configuring (default)
2=waiting for connection
ID 3=established 4=timed
out 5=deferred delete
2 Get Instance Type USINT 1=I/O message
3 Get Transport Class Trigger Byte 0x02, 0x03, 0x12, 0x13,
0x00 or 0x10 (valid
choices)
4 Get Produced Connection ID UINT 10xxxxxx010
xxxxxx=node address
or 0xFFFF
5 Get Consumed Connection ID UINT 10xxxxxx101
xxxxxx=node address
6 Get Initial Comm
Characteristics Byte 0x01 or 0x0f
7 Get Produced Connection Size UINT 8
8 Get Consumed Connection Size UINT 0
9 Get/Set Expected Packet Rate UINT 0 ms
12 Get Watchdog Timeout Action USINT 0=timeout (default)
13 Get Produced Connection Path
Length UINT 6
14 Get Produced Connection Path
LogicalSegment, Class
Class Number
Logical Segment, Instance
Instance Number
Logical Segment, Attribute
Attribute Number Array of:
USINT
0x20
0x04
0x24
0x01
0x30
0x03
15 Get Consumed Connection
Path Length UINT 4 or 0