Rockwell Automation 1203-EN1 EtherNet/IP-to-SCANport Module - Manual (Page 182)

I-4 Index
Non-Volatile Storage (NVS)
definition, G-6
in drive, 5-5
O
objects
list of, C-1 to C-30
using for Explicit messages, 6-3
ODVA EtherNet/IP specification, G-3
operating status, 1-6
P
Parameter Group object, C-11
Parameter object, C-8
parameters
convention, P-2
list of, B-1 to B-10
numbers, B-1
SCANport product
using emulated block transfer
commands to view, F-3 to
F-15
PCCC, G-6
PCCC object, C-13
Peer A Input parameter, B-7
Peer A Output parameter, B-9
Peer B Input parameter, B-7
Peer B Output parameter, B-9
Peer Cmd Mask parameter, B-7
Peer Flt Action parameter, B-8
Peer Inp Addr 1 - 4 parameters, B-8
Peer Inp Enable parameter, B-9
Peer Inp Status parameter, B-9
Peer Inp Timeout parameter, B-8
Peer Out Enable parameter, B-9
Peer Out Skip parameter, B-9
Peer Out Time parameter, B-9
Peer-to-Peer hierarchy
configuring a module for, 3-9
configuring a module to receive
data, 3-11
configuring a module to transmit
data, 3-10
definition, G-6
ping, G-7
PORT status indicator
locating, 7-1
troubleshooting with, 7-2
power consumption, A-1
preparing for an installation, 2-1
processor, see controller
programmable logic controller, see
controller
Q
quick start, 1-5
R
Ref Adjust parameter, B-7
Reference/Feedback
definition, G-7
in I/O image, 5-2
selecting an adjustment, 3-8
using, 5-4
Register object, C-6
regulatory compliance, A-2
related documentation, P-1
requested packet interval, 4-6
Reset Module parameter, B-4
RSLinx, P-1
RSLogix 5/500/5000
adding devices to the I/O
configuration, 4-2 to 4-7
definition, G-7
saving the I/O configuration, 4-7
using RSLinx with, 4-7