Rockwell Automation 1203-EN1 EtherNet/IP-to-SCANport Module - Manual (Page 15)

Getting Started 1-3
The EtherNet/IP-to-SCANport module is compatible with Allen-Bradley
drives and other products that support SCANport. SCANport is a
standard peripheral communication interface. At the time of publication,
compatible products include:
Equipment Shipped with the Module
When you unpack the module, verify that the package includes:
User-Supplied Equipment
To install and configure the 1203-EN1 module, you must supply:
Compatible Products
• 1305 Drives • 1397 DC Drives
• 1336 PLUS Drives • 1394 Servo Drives
• 1336 PLUS II Drives • 1557 Drives
• 1336 IMPACT Drives • SMC Dialog Plus
• 1336 FORCE Drives • SMP-3 Smart Motor Protectors
• 1336 REGEN Units • 2364F RGU Units
• 1336 SPIDER Drives
Required Equipment
❑ One EtherNet/IP-to-SCANport module in metal enclosure
❑ This manual
❑ A small flathead screwdriver (for wiring the DC power connector)
❑ Bulletin 1202 Communication Cable (1202-Cxx)
❑ Ethernet cable (refer to the EtherNet/IP Media Planning and
Installation Manual, Publication ENET-IN001…, for details.)
❑ Configuration tool, such as:
– DriveExplorer (version 4.03 or higher)
– DriveExecutive (version 3.01 or higher)
– BOOTP Server (version 2.1 or higher) (for network setup only)
❑ Controller configuration software (Example: RSLogix 5000)
❑ A PC connection to the EtherNet/IP network or serial connection via
1203-SFC serial cable
❑ An AC/DC converter such as Allen-Bradley AC Power Adapter
(Catalog # 20-XCOMM-AC-PS1) when DC supply is unavailable.