Lenze E94AYCER - Manual (Page 95)

Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 9.0 EN · 12/2013 · TD17
95
14 Parameter reference
14.2 Parameters of the communication module for slot MXI1
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C13864
C13865
Parameter | Name:
C13864 | Active station name
Data type: VISIBLE_STRING
Index: 10711 = 0x29D7
Display of the active station name used by the drive.
The active station name may differ from the contents of code C13899 , depending on whether the station name was
changed via the fieldbus or the parameter ( C13899 ).
 Setting the station name ( 35)
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C13865 | Display: Last safety PRM data
Data type: OCTET_STRING
Index: 10710 = 0x29D6
Display of the F_parameters sent last.
• These data are only valid if PROFIsafe is activated.
• The coding of the F_parameters is described in the PROFIsafe profile V2.0.
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Bytes Information
0 Slot
1
2
Subslot
3
4
Recldx
5
6
Accepted length
...
9
10
F_parameter
...
24