Lenze E94AYCER - Manual (Page 12)

3 Product description
3.1 Application as directed
12
Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 9.0 EN · 12/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Product description
3.1 Application as directed
The communication module ...
• is an accessory module that can be used in conjunction with the following standard devices:
• must only be used together with the following safety module:
• is a device intended for use in industrial power systems.
• should only be used under the operating conditions prescribed in this documentation.
• can only be used in PROFINET networks.
Any other use shall be deemed inappropriate!
3.2 Identification
The type designation and the hardware and software versions of the communication module are
indicated on the nameplate:
[3-1] Identification data
Product series Type designation From hardware
version
From software
version
Servo Drives 9400 HighLine E94AxHExxx 1A 04.00
Servo Drives 9400 PLC E94AxPExxxx VA 02.00
Regenerative power supply module E94ARNxxxx VA 01.00
Product series Type designation From hardware
version
From software
version
SM301 safety module E94AYAE VB 1.1
E94YCET005
1 Type designation
E94 Product series
A
Version
Y Module identification: Extension module
C Module type: Communication module
ER PROFINET
2 Hardware version
3 Software version