Lenze E94AYCER - Manual (Page 13)

Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 9.0 EN · 12/2013 · TD17
13
3 Product description
3.3 Product features
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.3 Product features
• Interface module for the PROFINET IO communication system, for attaching to the expansion
slots of Servo Drives 9400
• The communication module can either be supplied internally by the standard device or
externally by a separate voltage source.
• Support of the I&M0...4 functionality for the identification of the standard device
• Automatic detection of the baud rate 100 Mbps
• A line topology is enabled by the integrated 2-port switch.
• Support of the LLDP (Link Layer Discovery Protocol) for the topology recognition
• Support of the SNMP (Simple Network Management Protocol) for diagnostic purposes
• Transfer of safe information via the PROFIsafe protocol if an SM301 safety module (E94AYAE) is
used simultaneously
• Up to 32 process data words (64 bytes) per direction can be exchanged.
• Access to all Lenze parameters
• An online connection via PROFINET can be established using the Lenze »Engineer«.