Lenze E94AYCER - Manual (Page 103)

Lenze · E94AYCER communication module (PROFINET®) · Communication Manual · DMS 9.0 EN · 12/2013 · TD17
103
14 Parameter reference
14.3 Parameters of the communication module for slot MXI2
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14012
C14850
C14851
Parameter | Name:
C14012 | Active gateway address
Data type: UNSIGNED_8
Index: 10563 = 0x2943
Display of the active gateway address
The active gateway address may differ from the contents of code C14002 , depending on whether the station name
was changed via the fieldbus or the parameter ( C14899 ).
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C14012/1 Active gateway address.1
C14012/2 Active gateway address.2
C14012/3 Active gateway address.3
C14012/4 Active gateway address.4
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14850 | All words to master
Data type: UNSIGNED_16
Index: 9725 = 0x25FD
Display of the process data words which are transmitted from the communication module to the IO controller.
In the subcodes 1 to 32, all process data words to the IO controller are displayed. However, only the configured
process data words are valid.
Display range
(min. value | unit | max. value)
0 65535
Subcodes Info
C14850/1
...
C14850/32
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14851 | All words from master
Data type: UNSIGNED_16
Index: 9724 = 0x25FC
Display of the process data words which are transmitted from the IO controller to the communication module.
In the subcodes 1 to 32, all process data words from the IO controller are displayed. However, only the configured
process data words are valid.
Display range
(min. value | unit | max. value)
0 65535
Subcodes Info
C14851/1
...
C14851/32
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT