ETC Alex M Alex MX - Manual (Page 58)

List of factory settings Appendix
– 58 –
Alex M
030430-150B
Alex_M_E_150C_A5.doc
List of factory settings
RESET DEVICE on menu page 4, Basic Settings, allows you to reset all
the settings on your dimmer system to the factory settings. The menu
pages Parameters and Memory/Chaser offer reset functions that only apply
to certain settings.
Size Value
DMX start address 1
Behavior if DMX signal fails Hold
Fade-in time after DMX failure 0.5 s
Signal source DMX + Memory/Chaser
Minimum analog output 5 %
Fade-in time for intensity increments 40 ms
Dimmer control on
Max. output voltage 230 V
Menu language English
Display contrast 75 %
Manual output control for all channels 0 %
All stored presets deleted
All preheat output levels 0 %
All output limits 100 %
Dimmer curve for all channels linear
Non-Dim switching threshold 10 %
Weighting factor for all presets 0 %
Chaser fade-in time 0.0 s
Chaser wait time 1.0 s
Chaser sequence 1 2 3 ... 12