ETC Alex M Alex MX - Manual (Page 39)

Providing light automatically Creating a chase with the chaser function
Alex M
030430-150B
Alex_M_E_150C_A5.doc
– 39 –
Running a chase
1 Press [Page] to call menu page 3,
Memory/Chaser.
2 Use the knob to move the selection
cursor to the CHASE field.
• The current status (STOP) is
selected.
3 Press [Edit].
• The status display changes to GO.
Fig. 27: Running a chase
4 Press [Save] to activate the chase.
What you see on the display while the chaser function is active:
CHASE GO
→ XX =
Crossfade
from one preset to the next Chaser
function active
Current preset or next preset
Press [Page] twice to switch to menu page 1, Intensities, in order to
be able to follow the execution of the lighting sequence in the bar
chart.
While the presets are faded in, output levels from other settings or
sources continue to be output:
• Internally: Manual output levels created using menu
page 1, Intensities
• Externally: Output levels determined by other signal
sources
If you want to output all presets that have been stored alone,
the following prerequisites must be met:
• Signal source: Mem/Chase
• All manually created output levels must be at zero