ETC Alex M Alex MX - Manual (Page 38)

Creating a chase with the chaser function Providing light automatically
– 38 –
Alex M
030430-150B
Alex_M_E_150C_A5.doc
Setting a sequence of presets
You can define a sequence of 1 to a maximum of 12 presets in any order.
The SEQ row on menu page 3, Memory/Chaser, contains 12 positions for
this purpose that are prefilled with the 12 storable presets in ascending
order (factory setting). However, any preset can be assigned to each of
these sequence positions.
1 Press [Page] to call menu page 3,
Memory/Chaser.
2 Use the knob to move the selection
cursor to the SEQ row and to the
desired sequence position in this row.
3 Press [Edit] and use the knob to set the
desired preset number at this sequence
position
(preset no.
3 in the figure).
Fig. 25: Assigning a sequence
position
• Value range: . ., 1 to 12
• Two dots (. .) conclude a sequence that has less than 12 presets.
4 Press [Save] to save the selected preset or the characters concluding the
sequence (. .) at the current sequence position.
Example:
You want to run the following sequence:
Preset 7 – preset 2 – preset 12
Enter it in the SEQ row, as shown in Fig. 26.
• The sequence is executed as follows:
7 – 2 – 12 –
7 – 2 – 12 –
7 – 2 – 12 –
...
Fig. 26: Sequence of three as an
example