ETC Alex M Alex MX - Manual (Page 48)

Menu page 3: Memory/Chaser The menu pages
– 48 –
Alex M
030430-150B
Alex_M_E_150C_A5.doc
Input/display fields (continued)
CHASE Activates, holds and terminates the chaser function.
GO [Save] starts the chaser function.
HOLD [Save] holds the chaser function; the current
output values are retained.
STOP [Save] terminates the chaser function.
What you see on the display while the chaser function
is active:
CHASE GO
→ XX =
Crossfade
from one preset to the next
Chaser
function active
Current
preset or next preset
SEQ Sequence of stored presets that can be output using
the chaser function. The sequence can contain up to
12 presets.
Value range:
Factory setting: . . , 1 to 12
1 2 3 ... 12
. . Concludes a sequence which
contains less than 12 entries.
CLR _Yes_ [Save] sets the weighting factors (OUT) of all
presets to zero and terminates the chaser
function, if it is active.
The contents of the presets are retained.