ETC Alex M Alex MX - Manual (Page 47)

The menu pages Menu page 3: Memory/Chaser
Alex M
030430-150B
Alex_M_E_150C_A5.doc
– 47 –
Input/display fields
OUT Contribution made by the selected preset to the current
lighting. A bar shows you at a glance the weighting
factor applied for the preset.
Value range:
Factory setting: 0 to FF (0% to 100%)
0
MEM List of stored presets (12 memory blocks). The
weighting factor (the contribution made by a given
preset to the current lighting) is displayed as a small bar
under the preset number. The same applies to presets
that are not selected.
FADE Fade time for the chaser function: This is the time taken
for the first preset to fade in, for the first preset to
crossfade to the second, and so on. The fade time
applies to all presets.
Value range:
Factory setting: 0.0 to 999.0 (seconds)
0.0
SPEED Wait time for individual presets in the case of chases
Value range:
Factory setting: 1.0 to 999.0 (seconds)
0.0