ETC Alex M Alex MX - Manual (Page 30)

Intensity limit Providing stationary lighting
– 30 –
Alex M
030430-150B
Alex_M_E_150C_A5.doc
Setting the same intensity limit for all dimmer channels
1 Press
[Page] to call menu page 2,
Parameters.
2 Use the knob to move the selection
cursor to the ALL input field.
3 You can set the same values here for
all channels for the following:
− Preheat (PRE)
− Intensity limit (LIM)
− Dimmer curve (DCU)
Fig. 17: Setting the same intensity
limit for all channels
4 Turn the knob until ALL LIM appears.
• The currently set limit intensity value is highlighted (90 in the figure).
5 Press [Edit] and use the knob to set the desired limit intensity value.
6 Press [Save] to save the currently selected limit intensity value for all channels.